D Link Router Not Working? Here’s the Solution!
Your D Link WiFi router might be refusing to work because of an improper power supply. Therefore, you should always ensure a stable power supply to the router. For this, make sure that the router is connected to a working socket and that the power cable used by you is the genuine one. Be certain that you are using the one that you’ve got with your router. Yes, you got it right, the original one! The cable must not possess any cuts and the adapter is supposed to be free of damage. But, if the D Link router not working issue doesn’t seem to give up, you are free to take the aid of the hacks highlighted in this very write-up.
Solved: D Link Router Not Working
1. Power Cycle the Network
There are times when the device does not work properly just because of a network glitch. Chances are that a device present in your home network has been attacked by technical glitches. Therefore you should look forward to getting rid of them. The best solution for this situation is a power cycle. In this process, you are required to keep your router and modem powered down for at least 20 minutes.
Since you are power cycling the home network, there needs to be a particular sequence. Here it is:
- The modem needs to be powered down first.
- The second turn is of the router.
- Other WiFi devices can be turned off after that.
After power cycling the entire home network, you should check if the D Link router not working issue has bid farewell or not. Just in case, the situation is still the same, you are advised to make your way to the next hack.
2. Mend the Ethernet Connection
The Ethernet connection between the modem and router holds the base of the internet connection that you’ll get on your WiFi-enabled devices like computers or laptops. It means its weak status can even stop you from accessing the routerlogin Dlink portal. Thus, you should pay attention to the strength of this connection now. Have a look at the entire length of the cable.
While examining the cable connection, you are advised to verify the following things:
- The Ethernet cable in use should not be fragmented.
- The cable must be joining the router’s Internet port and the modem’s LAN1 port.
- You should establish a finger-tight connection between both devices.
Just in case the Ethernet cable used by you is found damaged, you are suggested to get it replaced with a new one. It will be great if you choose the one that belongs to Category 6. Is the internet connection i.e. the working status of your router back now? We hope so!
3. Update the Firmware
You reading this point is a clear sign that the D Link router not working problem is still adamant about leaving your side. It means that a reason other than those mentioned above is forcing you to face this problem. Well, that reason is nothing but a pending firmware update.
Therefore, you are required to log in to your D-Link wireless router and ensure that it functions on the latest stable firmware version. Check out the steps given below to learn how:
- Log in to the D-Link router using the valid admin password.
- Find Administrator Settings and then Firmware Update.
- You are now required to check if the firmware update is available by clicking the respective option.
If a new version of firmware is available for your router, consider walking through the prompts appearing on the screen and let your router get equipped with the same.
Now, it is time to wrap up the post that aimed to address the D Link router not working issue. It is now expected that you’ve successfully resolved the issue. But, if you are still stressing over the same situation, then you should know that the router needs to be restored to the default factory settings without any delay.
Doing so will wipe out all the customized settings from the router and help you get the issue fixed instantly. So, what are you waiting for? Find the Reset button on the WiFi router and push it very carefully with the help of an oil pin or a paper clip. The moment you release the button, your router will start running on the default settings. Lastly, configure it again using the default password and other info. Your router will definitely return to work this time.